Banana Split Switches

If you’re looking for a custom gaming keyboard, the Banana Split switches from TKC and C3Equalz might be the right choice. These switches are designed with a custom polycarbonate housing and POM stem and 62g gold-plated springs for improved acoustics and a slightly lower keypress pitch than standard switches. Some users report an improvement in acoustics after lubrication, though this isn’t necessary.

Alpaca v2

The Alpaca V2 banana split switch is similar to the original Alpaca V1 switch, but with different coloration. Its top and bottom housings are made of dark grey polycarbonate. The stems are light pink and rest atop gold-plated springs. The Alpaca V1 switch features a single-character alphabetic switch system and the V2 switch features double-character numeric switching.

This switch has a 62-gram weight and is produced by JWK. It features a purple or lavender housing and a yellow stem. According to the manufacturers, the housings are manufactured using proprietary molds. The stem is made of Polyoxymethylene.

The Alpaca V2 switches have a solid bottoming and topping sound. They are quieter than the V1 version. The Alpaca V2 switches have a deep, solid feel without any scratches. They are slightly softer than the V1 Alpacas.

For gamers who love smooth, linear switching, the Alpaca V2 Linear Switch is the perfect replacement for silicone and rubber switches. It is also 45% quieter than its Cherry MX Blue predecessor, making it perfect for office environments. Unlike the Alpaca V1, the Alpaca V2 has a longer stem, which makes it easier to grip and press the switch.

Alpaca V2 Linear Switch has a nylon-reinforced plastic washer, which reduces noise and stabilizes the switch. The Alpaca V2 Linear Switch is a PCB-mounted switch that features a smooth linear feel and shorter travel distance than Cherry MX Blue switches.

Banana split switches and Alpaca V2 switches are similar in appearance and sound, but the Alpaca V2 has a lower actuation force and is cheaper. The alpaca v2 switches are much quieter and are pre-lubricated at the factory. But if you’re on a budget, you can also choose a generic switch made by Gateron. These switches are available in plenty.

Gateron

Gateron Banana Split switches are 62-gram linear switches that are marketed by the company JWK. The switch has lavender or purple housing with a yellow stem. The housings are made from polycarbonate and nylon, while the stem is polyoxymethylene. According to the manufacturer, the housings are created using proprietary molds.

Gateron switches are known for their smooth linear motion. They’re made with POM or polycarbonate and are fairly easy to find. While they’re not factory lubricated, they do come with pre-lubricated switches. These switches don’t have tactile bumps, but they are very sensitive. This means that you need to apply very little pressure to activate the switch. These switches are also ideal for fast typing and fast finger movements. They also have a very smooth action, resulting in a consistent keypress.

The housing of Banana Split Switches is pink and purple and is made of polycarbonate and nylon. The housing is smooth and durable and protects the switch from damage. The stem is the part of the switch that you depress, and if it were made of flimsy material, it could break as you depress it.

If you’re looking for the best gaming keyboard, Banana Split switches can be an excellent choice. These switches are designed to be faster and quieter than traditional mechanical keyboards. However, they’re not available in stores outside the aftermarket. If you’re on a budget, a limited run of TKC switches might be the right choice for you.

Although Banana Split switches aren’t as responsive as Cherry MX switches, they’re easy to swap. However, you should unplug your keyboard before swapping the switches. You don’t want to risk short-circuiting your keyboard or destroying it. However, Banana Split switches are becoming increasingly popular and can be found at many online stores.

Dangkeebs Blue Velvet

Banana Splits are linear switches that weigh 62 grams. They feature purple and lavender housings and a yellow stem. The switch is made with a proprietary plastic called PME. The housings are made of nylon and polycarbonate. The stem is made of polyoxymethylene.

The Banana Split switches have 62 g of actuation force, which is a measure of the force required to register a keystroke. This force is different than the bottom-out force, which is the force required to hit the backplate of a keyboard. However, a Banana Split has a relatively high actuation force, with 62 grams of force required to bottom out.

Banana Split switches are quiet compared to other clicky switches. They produce less noise than Alpaca V2 or Cherry MX Red switches. In addition, they feature a gold-plated stem for long-lasting wear and tear. They are an excellent choice for both gaming and everyday computer use. These switches are often priced around $1 per switch. They are comparable to other brands like the ZealPC Tealio v2.

Banana Split switches can be swapped with other keyboards without the use of a soldering iron. However, before swapping switches, it is advisable to unplug your keyboard. If you do not do so, the metal springs can enter your keyboard, causing a short circuit and possibly even the destruction of it. Although Banana Split switches are not mass-produced like Cherry MX switches, they are popular and can be found in online stores.

Novelkeys’ Dry Series

If you want to upgrade your keyboard without breaking the bank, then Banana Split switches are a good choice. These switches are known for their smooth keypress and low actuation force. They are available in Red, Black, and Silent varieties. The latter requires about 60 g of force to activate. They are similar to the Reds but require lubrication.

Banana Splits come with lavender or purple housings and a yellow stem. The housings are made of nylon or polycarbonate. Their stems are made of polyoxymethylene. Both companies claim to have proprietary molds for their housings. This means that each switch is unique and no two switches are exactly alike.

Banana Split switches also have a quieter sound than most Clicky switches. also produce less noise than Alpaca V2 or Cherry MX Red switches. They are also made with durable housings and gold-plated stems for a long-lasting product. They are a good choice for both gaming and regular computer use.

Banana Split switches are easy to install and swap. Unlike Cherry MX switches, they do not require a soldering iron. However, it’s important to unplug your keyboard before swapping out the switches. Otherwise, you may end up with a short circuit or a damaged keyboard. Banana Split switches are very popular and not mass-produced like Cherry MX switches. However, they can be purchased at a number of online stores.

Gateron-made switches

When it comes to banana split switches, there are many great options out there. Gateron-made versions are known for being smooth, quiet, and have a great tactile feel. These switches are also compatible with Cherry profile keycaps. They are also considered to be very reliable. The company’s lineup of switches is huge and you’re likely to find a switch that will fit your needs.

Gateron makes its switches out of Polycarbonate, Fiberglass, and Nylon. The stems, however, are made of a proprietary blend of UHMWPE. Interestingly, Cherry has never revealed what material their stems are made of. Other manufacturers such as C3Equalz and TKC claim that their stems are made from proprietary molds.

While most manufacturers lubricate their switches before shipping them out, you can lubricate them yourself to save money. You can purchase non-factory lubricated switches from eBay and Reddit users. However, you should be aware that these types of switches are likely to cost more than the original price of the Gateron version. Gateron has not yet announced a new group buys, so you may have to wait for a while.

Akko also offers a number of low-cost alternatives to Gateron switches. Their MX Brown and CS Jelly are low-cost, high-quality switches that are both durable and affordable. They come in a variety of colors. If you prefer a non-clicky switch, try the KTT Strawberry or TTC Rose, which feature smooth, long-pole stems and a smooth feel.

Kailh is another good brand that makes affordable, high-quality switches. They are made of polycarbonate and POM, and they are easy to find. Kailh switches are made with a similar design to Gaterons. Both are made of POM and are not factory-lubricated. But you can choose to lubricate them if you prefer to.